|
T E
C H N I Q U E
Marian is technically a very complex loudspeaker that stands out in terms of quality where each component is carefully selected. Let’s follow the flow from when the signal comes into the loudspeaker until it creates its beautiful sound.
• The input cable is made by WBT (World Best Connectors) Signature Gold.
• From the WBT connector the signal travels via a specially selected cable through a balanced crossover
with Imp bass correction (12/12 db/Okt)
• The bass/midrange crossover has a unit in the signal path made of a pure copper coil.
• The treble unit has a serial capacitor with a silver conductor in an oil capacitor
• The treble and bass/midrange crossovers are from Danish ScanSpeak, both with neodymium magnets
• The bass-reproduction is comes from a port specially designed for high-speed airflow
• The cabinet dampens resonation with a textile layer which is the foundation of the powerful cabinet design.
• The Marian can be powered by all amplifiers with a sensitivity of 89 dB. We recommend amplifiers of 40-150W 8 Ohm’s
• The impedance is 8 Ohm’s, which means that your amplifier will not come under undue stress.
• Recommended placement: 15-30 cm from walls
•
Specifications : dimensions 103 x 23 x 24 cm - weight: 34 kg
Marian is designed so that its units never touch. That is done by carefully keeping good space between them. Both units have more than an octave extra to give on each side of the cross over frequency. This can only be done if the units are technically excellent, like this one.
|
